- Version
- Download 1
- File Size 484.33 KB
- File Count 1
- Create Date May 8, 2023
- Last Updated May 8, 2023
Bearing Packer Cap for White Lithium Grease - By sidoh10
Mirrored from here: https://www.thingiverse.com/thing:3355283
Replacement cap for a tube of White Lithium Grease with an M10x1.5 screw fitting.
Fusion 360 link in case you want to edit it: https://a360.co/2D8yNpR
When printing with PETG, print the upper part of cap very slowly (5-10 mm/s). I didn't need to change settings when printing with PLA. PLA was quite brittle and broke eventually, so I re-printed with PETG.